Posts in the How-To category

• Jan
  13

  How to install Paul Moto Brakes

  Excerpt:

  Today we are going to go over how to install Paul Moto Brakes

  Take everything out of the packages
  Undo the Tie wrap that holds the springs together.
  Put a little bit of grease on the brake bosses
  Install the…

  Tags: brakes, install, Paul Moto
  Comments: Be the first
• Jan
  13

  HOW TO INSTALL 48 SPLINE CRANKS

  Excerpt:

  Here were going to give you tips on how to install 48 spline cranks.
  First step is the preparation stage.  I know most people are going to use a hammer and a 2×4 to install the bearings into their frame,…

  Tags: 48, crank, install, spline
  Comments: 19 Comments »
• Jan
  6

  HOW TO GET A GOOD BMX GATE START

  Excerpt:

  Today we have a guest post from Matt Boller of BycycleManiac.com.
  A good gate start is created by great form and timing. Both of which is achieved by continuous practice.
  Timing:
  The timing on a gate varies from track to…

  Tags: gate starts, guest post, racing
  Comments: Be the first
• Jan
  6

  HOW TO POP A WHEELIE

  Excerpt:

  This is a how to pop a wheelie:

  Start at a slow rolling speed. The more comfortable you get the fast you can go. Make sure you dont go to fast for your first try. Make sure your at a good…

  Tags: bmx tricks, How-To, wheelie
  Comments: Be the first
• Jan
  6

  HOW TO GET INTO BMX RACING

  Excerpt:

  Here i am going to write a short little something on how to get started racing BMX!
  BMX (Bicycle moto cross) started in the early 70s from few kids trying to copy the acts of all the top motorcross riders.…

  Tags: How-To, racing
  Comments: Be the first
• Dec
  31

  How to fix V-brakes rubbing

  Excerpt:

  In this short entry i will explain how to fix your V-brakes if they are rubbing on the rim.

  First see what pad is hitting the rim, with that check the spring adjusting screws, it is either a small flat…

  Tags: brakes, fixes, v-brakes
  Comments: Be the first